The following procedure assumes that the device to be connected to the Department’s wireless network is running Android 5.0 or later. The example below used a Nexus tablet running Android 5.1.1.
Important Note: Access to the CUED wireless network is controlled on a per user basis and before access is granted a request for network access form must first be completed and submitted for consideration.
- From Settings ensure that Wi-Fi is enabled:
- Tap the CUED wireless network in the list of available networks and you should be prompted for some additional information.
- For the EAP method select PEAP from the drop down list.
For Phase-2 authentication select MSCHAPV2 from the drop down list.
The CA certificate can be (unspecified).
The Identity should be your CRSid followed by
Anonymous identity can either be be left blank or should be
For the Password you will need to enter your central Engineering Department password, sometimes referred to as the Teaching System password:
- Tap Connect to continue.
- You should now be successfully connected to the CUED wireless network:
- Tap Done to finish.